|
Pro-Grip for
1/16" Cable
IHP - 15 - 1420 - S
Type 15 grip for 3/64" and 1/16" Cable
1/4 - 20 External Thread
Safety Nut
Steel Construction
7 x 7 or 7 x 19 cable only |
|
Pro-Grip for
1/8" Cable
IHP - 30 - 3816E - V6 - S
Grip for 3/32" and 1/8" cable
Type 30 - 6. Ball mechanism, 3/8 - 16 external thread.
Safety nut. Steel Construction.
7 x 7 or 7 x 19 cable only |
|
Pro-Grip Snap
Hook for 1/16" Cable
IHP - 15Z - 1420 - 6HA
Grip for 1/16" cable with side exit snap hoop
7 x 7 or 7 x 19 cable only |
|
Pro-Grip Snap
Hook for 1/16" Cable-Small
IHP - ZF - 15 - 6HA
Cable fast grip for 1/16" cable
|
|
Pro-Grip Snap
Hook for 1/8" Cable
IHP - 30Z - 1420 - V6 - GHA
Grip for 1/8" aircraft cable
6 ball mechanism with safety nut. Steel construction.
7 x 7 or 7 x 19 cable only. |
|
Pro-Grip with
Forged Eye for 1/16" Cable
IHP - 15 - 1420 - S - FE
Type 15 as above but with a forged eyenut |
|
Pro-Grip with
Forged Eye for 1/8" Cable
IHP - 30 - 3816E - V65 - FE
Type 30 gripper as above with 3/8 - 16 forged eye
7 x 7 or 7 x 19 cable only. |
|
NEW!
Pro-Grip
IHP - 50 - M12e - V6B
Type 50 gripper with safety cap for 3/16" cable
Rating 700 pounds
Also available nickel-plated as
IHP - 50 - M12e - V6 |
|
NEW!
Pro-Grip
IHP - 50Z - M12e - V6B
Type 50 gripper with side exit and safety cap
for 3/16" cable
Rating 700 pounds
Also available nickel-plated as
IHP - 50Z - M12e - V6 |
THE FOLLOWING WEIGHT LOADS ARE FOR PROLOCK GLIDERS
ONLY.
Always apply 1 : 5 ratio of static load to minimum break strength.
WARNING: The following figures do not apply to ProFast or any
other cable - gripping products.
Please see following chart for ProFast information. |
Cable Diameter
|
Minimum Break-Strength with
Cable Glider in Lbs.
|
Inches |
Mms. |
Type-12 |
Type-15 |
Type-18 |
Type-20 |
Type-25 |
Type-30 |
Type-50 |
Type-80 |
1:5 Ratio |
|
1.0 |
145 |
|
|
|
|
|
|
|
29L |
3/64" |
1.2 |
165 |
165 |
|
|
|
|
|
|
33 |
|
1.5 |
|
275 |
275 |
275 |
|
|
|
|
55 |
1/6" |
1.6 |
|
275 |
275 |
275 |
|
|
|
|
55 |
|
1.8 |
|
|
330 |
330 |
330 |
|
|
|
66 |
5/64" |
2.0 |
|
|
|
440 |
440 |
440 |
|
|
88 |
3/32" |
2.4 |
|
|
|
|
615 |
615 |
|
|
123 |
|
2.5 |
|
|
|
|
660 |
660 |
|
|
132 |
|
3.0 |
|
|
|
|
|
900 |
|
|
180 |
1/8" |
3.2 |
|
|
|
|
|
1100 |
|
|
220 |
3/16" |
4.8 |
|
|
|
|
|
|
2550 |
|
510 |
|
5.0 |
|
|
|
|
|
|
2700 |
|
540 |
5/16" |
8.0 |
|
|
|
|
|
|
|
5000 |
1000 |
|
|
|
|
|
|
|
|
|
|
|
THE FOLLOWING WEIGHT LOADS ARE FOR PROFAST GRIPPERS
ONLY.
Always apply 1 : 5 ratio of static load to minimum break strength.
WARNING: The following fiures do not apply to Prolock or any
other cable - gripping products.
Please see preceding chart for Prolock information. |
Cable Diameter |
Break-Strength with Cable
Glider in Lbs. |
Inches |
Mms. |
Type-12 |
Type-15 |
Type-25 |
1:5 Ratio |
3/64" |
1.2 |
125 |
125 |
Do NOT use with 3/64" cable |
25 |
1/16" |
1.6 |
|
150 |
Do NOT use with 1/16" cable |
30 |
5/64" |
2.0 |
|
|
325 |
65 |
3/32" |
2.4 |
|
|
475 |
95 |
GENERAL INFORMATION
Thread & KO Sizes
|
Glider & Cable
Compatibility
|
Thread Designation |
Thread Diameter |
Fixture KO Size |
Glider Type i.e. 15-1420 |
Cable Dia. mms. |
Cable Dia. Inches |
1/8IPS=1/8-27 NPSM |
3/8" |
7/16" |
Type-10 |
1.0 |
1/32" |
1/4IPS=1/4-18 NPSM |
1/2" |
9/16" |
Type-12 |
1.2 |
3/64" |
3/8IPS=3/8-18 NPSM |
5/8" |
11/16" |
Type-15 |
1.6 |
1/16" |
1/2IPS=1/2-14 NPSM |
13/16" |
7/8" |
Type-18 |
1.8 - 2.0 |
5/64" |
10-32 |
0.19" |
3/16" |
Type-20 |
2.0 |
5/64" |
1/4-20 |
0.24" |
1/4" |
Type-25 |
2.5 |
3/32" |
3/8-16 |
0.38" |
7/16" |
Type-30 |
3.0 |
1/8" |
M4 |
0.16" |
5/32" |
Type-50 |
5.0 |
3/16" |
M6 |
0.24" |
1/4" |
Type-80 |
8.0 |
5/16" |
NOTE:
Weight load charts and other specifications are for
illustration purposes only. They should not be construted as a warranty
that the product or system will conform. Each purchaser is solely
responsible for determining that (1) the product and/or system is suitable for
the intended application and (2) it complies with all federal, state and local
safety and trade laws and regulations.
LIABILITY INSURANCE COVERAGE:
Prolock/ProFast's product
Liability Insurance is worldwide and covers each individual Prolock and ProFast
component (factory-cut and swaged or molded cable, ceiling attachments &
grippers) when professionally installed in non-corrosive indoor environments
according to our weight load guidelines and those mandated by federal, state and
local ordinance. Installers are cautioned that the integrity of structures
to which these components are attached & the fasteners used to attach them
should be evaluated by a qualified engineer. Prolock/ProFast, its
employees, agents & assigns waive all liability for accidents due to failure
to adhere to the preceding guidelines and accidents caused by field or
non-factory-installed cable crimps and/or modifications to the system using non
- Prolock/ProFast parts.
|
|
|