|
Pro-Screen Clamp for
1" Screens & Pipe
IHP-SQSCR100PL/
1”
Pro-Screen Clamp for all 1” Fast-Fold Screen
hanging applications, also fits all 1” steel and aluminum square tubing.
The clamp is tapped for 3/8”x 16 external threads and is also sold with
our Pro- Lock gripper for 1/8” aircraft cable w/ full up and down
adjustability.
Can be used with our Pro-Grips or a Forged Eye.
(Click
for testimonial.)
|
|
Pro-Screen Clamp for 1
1/4" Screens & Pipe
IHP-SQSCR125PL/
1-1/4”
Pro-Screen Clamp for all 1-1/4” HD Fast-Fold Screen hanging
applications, also fits 1-1/4” steel and aluminum square tubing. The
clamp is tapped for 3/8” x 16 external threads and is also sold with our
Pro-Lock gripper for 1/8” aircraft cable w/ full up and down
adjustability.
Can be used with our Pro-Grips or a Forged Eye.
|
|
Clic-Pipe Road
Case.
Case holds up to 600’ of 1’,2’,3’,4’
with 100 clamps,
aircraft cable, crimp tools, crimps, cutters,
and Pro-Locks needed to hang banners.
Can be used with our Pro-Grips or a Forged Eye. |
|
Pro-Banner Clamp for
1" Clic- Pipe or EMT
IHP - CL1LP
Tapped for 1/4" - 20
Also available in black
55lb Working Load Limit
Can be used with our Pro-Grips or a Forged Eye.
|
|
Pro-Banner Clamp for
1" Clic- Pipe or EMT
IHP - CL2LP
Tapped for 3/8" - 16
Also available in black
220lb Working Load Limit
Can be used with our Pro-Grips or a Forged Eye.
|
|
Pro-Safety Clamp
For Hanging
Clic-Pipe Using QuickLinks
IHP - CL2SA
Quick Links, Cable Loops, Carabiner, Etc.
Clamp rated at 40 lbs. |
|
Pro-Pipe or Truss ToTelerod
IHP - CLOPD
Used to hang Pocketed Drape with Telerod (pipe and drape) to 1-1/2”
stage batten pipe (1-1/2” schedule 40 black steel pipe) or Aluminum
Truss.
|
|
IHP - CLOPD
In its component parts
Also available in black |
|
Clic-Pipe Insert
IHP - IN010
10" Long Pipe Insert
For connecting clic-pipe into various lengths |
|
Clic-Pipe
IHO - PI001 to
IHP - PI010
1" Pipe
1 ft to 10 ft lengths
Also pipe
Standard pipe lengths are from 1' to 5' and 10'
All other lengths are custom made |
|
Clic-Pipe
Pipe shown being
clicked together
A real time and labor saver
Space clamps 6 ft about and you can also add insert for more stiffness |
|
Clic-Pipe
Limited only by
your imagination.
System shown in use |
WARNING Do not exceed
(W.L.L.) of these clamps!
Clamps are rated for 70lbs a point with 1/8" cable and 40lbs a point
for 1/16" cable! Clamps should be spaced a maximum of 6 ft.
apart!
Do not get the cable caught
between the two clamp halves as you are tightening the clamp!
The 1/8" Pro-Lock
gripper you are using is thread locked to the clamp. If for any
reason the Pro-Lock is removed from the clamp, you must use Loctite 266
to reassemble the Pro-Lock to the clamp!
WARNING! Once you have
adjusted the Pro-Lock gripper, you must tighten the safety nut firmly to
lock the gripper in place!
The Product(s) must be
installed by qualified rigging personnel. Incorrect use may cause
hazardous conditions and possible injury!
Do not exceed working
load limits (W.L.L.) of the clamps used with this pipe for any reason!
Please leave at least 1" of cable showing
through the bottom of the Pro-Lock
|
PIPE INSTRUCTIONS!
Please do not drop pipe
sections as the inserts will not fit properly if the ends of the pipe are
bent or somehow obstruction.
MAKE SURE WHEN INSERTS ARE
SLID INTO THE PIPE SECTIONS THAT ALL SNAP BUTTONS ARE UP AND FULLY
VISIBLE. INSTALL CLAMPS SO THEY ARE NOT PUSHING DOWN ON THE SNAP
BUTTONS.
The Product(s) must be
installed by qualified rigging personnel.
Incorrect use may cause hazardous conditions and possible injury.
Do not exceed working load limits (W.L.L.) of the clamps
used with this pipe for any reason!
|